Atlas Donaire Instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wentylator Atlas Donaire. Atlas Donaire 13 stron. 52” ceiling fan
Drukuj stronę11. OPERATING THE
REMOTE CONTROL
Install 12V MN21/A23 battery (included).
To prevent damage to transmitter, remove the
battery if not used for long periods. (Fig. 16)
Restore Power to Ceiling Fan.
A. H, M, L Buttons:
These buttons are used to set the fan speeds as
follows;
L: Low Speed
M: Medium Speed
H: High Speed
B. OFF Button:
This button turns the fan off. When fan is turned
off, a momentary increase in speed can occur
before the fan slows and then finally stops.
C. ACCESSORY Button:
This button is used to turn on and off the light kit
and also controls the brightness setting. Press
and release this button to turn the light on or off.
Press and hold the button to set the desired
brightness. The light button has an auto-
resume, it will stay at the same brightness as
the last time it was turned off.
D. REV Button:
This button is to control fan direction.
12. OPERATING YOUR
FAN
Speed settings for warm or cool weather depend
on factors such as the room size. Ceiling height,
number of fans and so on.
NOTE: To operate the reverse function on this
fan, press the reverse button while the fan is
running.
Warm weather - (Forward) A downward airflow
creates a cooling effect as shown in Fig. 18.
This allows you to set your air conditioner on a
warmer setting without affecting your comfort.
Cool weather - (Reverse) An upward airflow
moves warm air off the ceiling area as shown in
Fig. 19. This allows you to set your heating unit
on a cooler setting without affecting your comfort.
9
Figure 16
REV
Figure 17
Figure 18
Figure 19