Atlas Melody AC-MGM2 Gebrauchsanweisung - Seite 6
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Fan Atlas Melody AC-MGM2 herunter. Atlas Melody AC-MGM2 9 Seiten. Wall mounted fan
Seite drucken
MOUNTING/INSTALLATION
OF THE WALL CONTROL
1. Remove the existing wall plate and switch.
(Fig. 7)
2. Set knobs on the new, wall control in the
"0" position.
3. Make speed control wire connections (Fig.
8). Ensure that bare wires are fully inserted
into their terminals with no loose strands
and that terminal screws are fully tightened.
Hot/Live wire from fan blade motor to wall
speed control port labeled "Fan."
Hot/Live wire from oscillation motor to wall
speed control labeled "To Light," Note:
Perform this step if yours is a two/dual
circuit installation. If this is a single circuit
application, this step will be ignored and the
blade motor and oscillation motor will not be
operated independently.
Hot/Live, household supply wire to wall
speed control port labeled "To Hot/Live."
4. Connect, if present, the wall speed control's
ground wire directly to one of the screws
from the outlet box. (Fig. 9)
5. Attach the wall control to the outlet (wall)
box and secure with 2 outlet box screws.
(Fig. 8)
6. Push the wall plate to the wall speed
control. (Fig. 9)
Outlet box
Wall plate
Screws
5
Switch
Screws
Figure 7
Figure 8
Outlet box
Switch
Figure 9
Wall plate