Atlas Melody AC-MGM2 Manual de instruções - Página 6

Procurar online ou descarregar pdf Manual de instruções para Ventilador Atlas Melody AC-MGM2. Atlas Melody AC-MGM2 9 páginas. Wall mounted fan

MOUNTING/INSTALLATION

OF THE WALL CONTROL

1. Remove the existing wall plate and switch.

(Fig. 7)

2. Set knobs on the new, wall control in the

"0" position.

3. Make speed control wire connections (Fig.

8). Ensure that bare wires are fully inserted

into their terminals with no loose strands

and that terminal screws are fully tightened.

Hot/Live wire from fan blade motor to wall

speed control port labeled "Fan."

Hot/Live wire from oscillation motor to wall

speed control labeled "To Light," Note:

Perform this step if yours is a two/dual

circuit installation. If this is a single circuit

application, this step will be ignored and the

blade motor and oscillation motor will not be

operated independently.

Hot/Live, household supply wire to wall

speed control port labeled "To Hot/Live."

4. Connect, if present, the wall speed control's

ground wire directly to one of the screws

from the outlet box. (Fig. 9)

5. Attach the wall control to the outlet (wall)

box and secure with 2 outlet box screws.

(Fig. 8)

6. Push the wall plate to the wall speed

control. (Fig. 9)

Outlet box

Wall plate

Screws

Switch

Screws

Figure 7

Figure 8

Outlet box

Switch

Figure 9

Wall plate