Advanced Radio I Charger Anleitung Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Batterieladegerät Advanced Radio I Charger herunter. Advanced Radio I Charger 9 Seiten.

Seite drucken

Congratulations for choosing the Advanced Radio Intelligent Micro

Charger - The worlds first Automatic Intelligent charger designed

to mount directly in your giant scale model.

Gone are the days when you had to carry a charger to the field. All

you need with the Advanced Radio I Charger is a 12 volt DC power

supply.

Before you install I Charger please take the time to

read these instructions. A few simple steps will have

you successfully using this easy-to-use product in no

time at all.

I Charger Features and Specifications:

- 32 bit Processor for crisp display and highest resolution in the industry.

- Bright full colour OLED for easy day time reading of pack voltage,

instantaneous charge current and mAh charge amount into the pack

- Completely automatic charging, simply connect 12 volts.

- Available 2 battery pack, 3 battery pack and 4 battery pack configura-

tion.

- Charges at up to 2A per pack. Charge current is automatically selected

by the advance charge algorithm.

- Auto on-board over heat function limits charge current if temperature

becomes too high.

- Optional external temperature sensors for charging LiPo pack. Au-

tomatically stops charge function if pack temperature climbs above

40C/100F. Charge function resumes when temperature decreases to

safe working level.

- Maximum input voltage 15 volts.

- Minimum input voltage 11 volts.

- Weight is only 78 grams 2.9oz (3 stack version).

- Dimensions (3 Stack Version) 62mm x 47mm x 35mm (2.4 x 1.86 x 1.43

inches).

- Supplied with DC Charge Jack for mounting to your model and DC plug

for connecting to 12 volts.

DO'S

and

I Charge is designed to charge 2 cell Life (6.6v), Lion(8.2v) and

Lipo (8.4v) batteries and is available 2 battery pack, 3 battery pack

or 4 battery pack configurations. You simply set the battery type

on each stack slider switch. Connect your battery and when ready

to charge simply connect a 12 volts DC power supply. It is really

that simple.

I Charger is also supplied with an ultra connector and an external

DC charge socket for mounting in your model. I Charge can also

be used as a stand alone charger.

I Charger MOUNTING POSITION

The Advanced Radio I Charger will get hot when charging bat-

teries. YOU MUST provide adequate space when mounting the I

Charger in your model. It is advised that you mount the I Charger

vertically so that thermal cooling is maximized. Failure to pro-

vide an adequate cooling environment will result in lower charge

currents and a longer charge time.

CHARGING WITH I Charger

While the I Charger comes with the utmost in safety design,

Advanced Radio states that you should NEVER leave Lithium bat-

teries unattended while charging.

I Charger requires a 12 volt DC filtered supply to operate. This

supply can be your car battery or a high quality 12 volt DC power

pack.

DO NOT USE I Charger with power supply voltages higher

than 15 volts DC. High supply voltages could damage the input

filtering capacitors and while reparable this will not be covered

under warranty.

DON'TS