Advanced Radio I Charger Інструкція з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Зарядний пристрій Advanced Radio I Charger. Advanced Radio I Charger 9 сторінок.
Друкувати сторінкуCongratulations for choosing the Advanced Radio Intelligent Micro
Charger - The worlds first Automatic Intelligent charger designed
to mount directly in your giant scale model.
Gone are the days when you had to carry a charger to the field. All
you need with the Advanced Radio I Charger is a 12 volt DC power
supply.
Before you install I Charger please take the time to
read these instructions. A few simple steps will have
you successfully using this easy-to-use product in no
time at all.
I Charger Features and Specifications:
- 32 bit Processor for crisp display and highest resolution in the industry.
- Bright full colour OLED for easy day time reading of pack voltage,
instantaneous charge current and mAh charge amount into the pack
- Completely automatic charging, simply connect 12 volts.
- Available 2 battery pack, 3 battery pack and 4 battery pack configura-
tion.
- Charges at up to 2A per pack. Charge current is automatically selected
by the advance charge algorithm.
- Auto on-board over heat function limits charge current if temperature
becomes too high.
- Optional external temperature sensors for charging LiPo pack. Au-
tomatically stops charge function if pack temperature climbs above
40C/100F. Charge function resumes when temperature decreases to
safe working level.
- Maximum input voltage 15 volts.
- Minimum input voltage 11 volts.
- Weight is only 78 grams 2.9oz (3 stack version).
- Dimensions (3 Stack Version) 62mm x 47mm x 35mm (2.4 x 1.86 x 1.43
inches).
- Supplied with DC Charge Jack for mounting to your model and DC plug
for connecting to 12 volts.
2
DO'S
and
I Charge is designed to charge 2 cell Life (6.6v), Lion(8.2v) and
Lipo (8.4v) batteries and is available 2 battery pack, 3 battery pack
or 4 battery pack configurations. You simply set the battery type
on each stack slider switch. Connect your battery and when ready
to charge simply connect a 12 volts DC power supply. It is really
that simple.
I Charger is also supplied with an ultra connector and an external
DC charge socket for mounting in your model. I Charge can also
be used as a stand alone charger.
I Charger MOUNTING POSITION
The Advanced Radio I Charger will get hot when charging bat-
teries. YOU MUST provide adequate space when mounting the I
Charger in your model. It is advised that you mount the I Charger
vertically so that thermal cooling is maximized. Failure to pro-
vide an adequate cooling environment will result in lower charge
currents and a longer charge time.
CHARGING WITH I Charger
While the I Charger comes with the utmost in safety design,
Advanced Radio states that you should NEVER leave Lithium bat-
teries unattended while charging.
I Charger requires a 12 volt DC filtered supply to operate. This
supply can be your car battery or a high quality 12 volt DC power
pack.
DO NOT USE I Charger with power supply voltages higher
than 15 volts DC. High supply voltages could damage the input
filtering capacitors and while reparable this will not be covered
under warranty.
DON'TS
3