Bose lifestyle650 Benutzerhandbuch - Seite 31

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Home Theater System Bose lifestyle650 herunter. Bose lifestyle650 44 Seiten.

Seite drucken

Symptom

The wireless receiver

status LEDs are solid

amber (dim)

Sound is distorted

No sound from a

connected device

No TV picture, but audio

is heard

A connected device

is not responding

consistently to remote

commands

Intermittent audio

dropouts heard on

coaxial digital audio

devices

Connecting to a new

network or different

network

Solution

• Follow the on-screen troubleshooting prompts.

• Press the

rerun the UNIFY

• Unplug the power cords for the receivers, wait 30 seconds and

plug them firmly into a live AC (mains) outlet.

• Make a wired connection to your rear speakers. Contact Bose®

customer service. Refer to the contact sheet in the carton.

• Cycle through and test different sources.

• Reduce the volume output level from any devices connected to the

control console.

• Make sure the audio input cable from your source device is

connected and not damaged.

• If you have not previously run ADAPTiQ®, select ADAPTiQ® from

the UNIFY

menu (see page 13).

• Unplug the power cord for the console, wait 30 seconds and plug it

firmly into a live AC (mains) outlet.

• Power on the device.

• Cycle through and test different sources.

• Refer to the device owner's manual.

Make sure the TV video input selection is correct for the video source.

• Try setting up the device again. Press the

control console. Select the device options and follow the on-screen

instructions to set up the device again.

• Replace your remote's batteries (see page 42).

• Set up your IR emitter (see page 32).

• Confirm that the audio cable is properly connected to the console

and the coaxial digital audio device.

• Cycle through and test different sources.

• Try setting up the device again. Press the

control console. Select the coaxial digital audio device options and

follow the on-screen instructions to set up the device again.

• Unplug the power cord for the console, wait 30 seconds and plug it

firmly into a live AC (mains) outlet.

• If your network information has changed or to connect your system

to another network, refer to the SoundTouch® in-app help.

• If having problems connecting wirelessly, connect to the network

using an Ethernet cable.

T R O U B L E S H O O T I N G

button on the control console or your remote and

setup (see page 14).

button on the

E N G L I S H - 3 1