Bose lifestyle650 Руководство пользователя - Страница 31
Просмотреть онлайн или скачать pdf Руководство пользователя для Система домашнего кинотеатра Bose lifestyle650. Bose lifestyle650 44 страницы.
Печатать страницу
Symptom
The wireless receiver
status LEDs are solid
amber (dim)
Sound is distorted
No sound from a
connected device
No TV picture, but audio
is heard
A connected device
is not responding
consistently to remote
commands
Intermittent audio
dropouts heard on
coaxial digital audio
devices
Connecting to a new
network or different
network
Solution
• Follow the on-screen troubleshooting prompts.
• Press the
®
rerun the UNIFY
• Unplug the power cords for the receivers, wait 30 seconds and
plug them firmly into a live AC (mains) outlet.
• Make a wired connection to your rear speakers. Contact Bose®
customer service. Refer to the contact sheet in the carton.
• Cycle through and test different sources.
• Reduce the volume output level from any devices connected to the
control console.
• Make sure the audio input cable from your source device is
connected and not damaged.
• If you have not previously run ADAPTiQ®, select ADAPTiQ® from
®
the UNIFY
menu (see page 13).
• Unplug the power cord for the console, wait 30 seconds and plug it
firmly into a live AC (mains) outlet.
• Power on the device.
• Cycle through and test different sources.
• Refer to the device owner's manual.
Make sure the TV video input selection is correct for the video source.
• Try setting up the device again. Press the
control console. Select the device options and follow the on-screen
instructions to set up the device again.
• Replace your remote's batteries (see page 42).
• Set up your IR emitter (see page 32).
• Confirm that the audio cable is properly connected to the console
and the coaxial digital audio device.
• Cycle through and test different sources.
• Try setting up the device again. Press the
control console. Select the coaxial digital audio device options and
follow the on-screen instructions to set up the device again.
• Unplug the power cord for the console, wait 30 seconds and plug it
firmly into a live AC (mains) outlet.
• If your network information has changed or to connect your system
to another network, refer to the SoundTouch® in-app help.
• If having problems connecting wirelessly, connect to the network
using an Ethernet cable.
T R O U B L E S H O O T I N G
button on the control console or your remote and
setup (see page 14).
button on the
button on the
E N G L I S H - 3 1