Bose Lifestyle SA-3 Benutzerhandbuch - Seite 26
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Bose Lifestyle SA-3 herunter. Bose Lifestyle SA-3 32 Seiten. Bose stereo amplifier owner's guide sa-2, sa-3
Auch für Bose Lifestyle SA-3: Handbuch (34 seiten), Theorie der Arbeitsweise (4 seiten)
Seite drucken
Setting Up Advanced Features
Amplifier mode switches
Figure 21
SA-2 and SA-3
microswitches
Stereo or mono output (SA-3 only)
Automatic detection of a local source (SA-3 only)
Single and supplemental amplifiers
26
The advanced features of the Lifestyle
and C (Figure 21). The SA-3 has all three switches, but the SA-2 has only switch C.
Switch Position Function
SA-3
A B C 6 7 8 9
A
SA-2
B
C 6 7 8 9
C
The output of the SA-3 amplifier can be set to stereo (switch A up – factory setting) or mono
(switch A down). The mono output mode feeds left and right channel audio to both the left
and right outputs. This mode is useful in situations where a stereo output isn't feasible such
as when outdoor speakers are used in a large area.
When a source is connected to the AUX INPUT jacks, you can set the amplifier to detect
when that source is turned on, thereby automatically switching the amplifier from standby
to on.
The amplifier is shipped with this feature turned off. For local source automatic detection, set
switch B up.
If you want to cover a large area, such as an outdoor patio, requiring more than one set of
speakers, you can install additional amplifiers. See the setup for room C in "Setup guidelines
for additional rooms" on page 23.
• Leave switch C down (factory setting – single amp mode) on one amplifier and set switch C
up (supplemental amp mode) on all other amplifiers.
• Set the room code in all amplifiers to the same room code as in the remote control.
• Now, you can turn them all on and off, change their volumes, or mute them together using a
single remote control.
®
stereo amplifier are set up using microswitches A, B,
Down
Mono output
Up*
Stereo output
Down*
Local source auto detect Off
Up
Local source auto detect On
Down*
Single amp
Up
Supplemental amp
*Factory setting