Bose Lifestyle SA-3 소유자 매뉴얼 - 페이지 26

{카테고리_이름} Bose Lifestyle SA-3에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Lifestyle SA-3 32 페이지. Bose stereo amplifier owner's guide sa-2, sa-3
Bose Lifestyle SA-3에 대해서도 마찬가지입니다: 매뉴얼 (34 페이지), 운영 이론 (4 페이지)

페이지 인쇄

Setting Up Advanced Features

Amplifier mode switches

Figure 21

SA-2 and SA-3

microswitches

Stereo or mono output (SA-3 only)

Automatic detection of a local source (SA-3 only)

Single and supplemental amplifiers

The advanced features of the Lifestyle

and C (Figure 21). The SA-3 has all three switches, but the SA-2 has only switch C.

Switch Position Function

SA-3

A B C 6 7 8 9

SA-2

C 6 7 8 9

The output of the SA-3 amplifier can be set to stereo (switch A up – factory setting) or mono

(switch A down). The mono output mode feeds left and right channel audio to both the left

and right outputs. This mode is useful in situations where a stereo output isn't feasible such

as when outdoor speakers are used in a large area.

When a source is connected to the AUX INPUT jacks, you can set the amplifier to detect

when that source is turned on, thereby automatically switching the amplifier from standby

to on.

The amplifier is shipped with this feature turned off. For local source automatic detection, set

switch B up.

If you want to cover a large area, such as an outdoor patio, requiring more than one set of

speakers, you can install additional amplifiers. See the setup for room C in "Setup guidelines

for additional rooms" on page 23.

• Leave switch C down (factory setting – single amp mode) on one amplifier and set switch C

up (supplemental amp mode) on all other amplifiers.

• Set the room code in all amplifiers to the same room code as in the remote control.

• Now, you can turn them all on and off, change their volumes, or mute them together using a

single remote control.

stereo amplifier are set up using microswitches A, B,

Down

Mono output

Up*

Stereo output

Down*

Local source auto detect Off

Local source auto detect On

Down*

Single amp

Supplemental amp

*Factory setting