Drolet EVEREST DH04200 Benutzerhandbuch - Seite 12
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Herd Drolet EVEREST DH04200 herunter. Drolet EVEREST DH04200 16 Seiten. Drolet oil burning stove owner's manual
Seite drucken
PROBLEMS
ON POSITION 6 (MAXIMUM)
THE FLAME IS LONG AND
SMOKY,
THERE
IS
BUILD UPON THE GLASS.
ON POSITION 1 (MINIMUM)
THE FLAME PRODUCES
SMOKE AND SUITS THE
GLASS.
ON POSITION 1 (MINIMUM)
THE FLAME PRODUCES
SMOKE AND SUITS THE
GLASS.
TROUBLESHOOTING GUIDE
CAUSES
Position 6 was reached too
quickly.
SUIT
Maximum flow is too high.
Cleaning tee and/or burner are
dirty.
Orifice of plunger is partially
plugged.
Flow is to low.
Page 11 of 15
SOLUTION
1. Set flow regulating handle
to position 1;
2. wait
for
combustion
stabilize;
3. Progressively increase flow
to desired position.
NOTE :
SEE
LIGHTING
PROCEDURES.
1. Set flow to a lower position;
2. Call a qualified technician
to adjust the valve.
1. Activate
cleaning
according to procedures;
2. Schedule at the next shut
off to clean the burner.
1. Progressively increase flow
to position ''6'';
2. Push in many consecutive
times on the thermostatic
regulator bottom to remove
dirt form the orifice.
NOTE : If the problem persist,
you may have to remove and
clean out the valve with alcohol.
Call
your
specialized
technician.
1. Slightly increase the flow
regulating handle;
2. Call
a
specialized
technician.
to
tee