Drolet HUNTER DB00400 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kochfeld Drolet HUNTER DB00400 herunter. Drolet HUNTER DB00400 11 Seiten. Wood heater and cook stove

Seite drucken

Couplings:

Once the unit is in place and the minimum clearances are respected, it must be coupled to

the chimney with a connector (commonly called "stove pipe").

Verify the clearance

between your stove pipe and the surrounding combustible material. If the standard

minimum 18-inch (457 mm) clearance cannot be obtained, you may use an insulated stove

pipe or a thermal protection shield. Read and respect the pipe manufacturer's instructions

before installation.

Your smoke evacuation system should be assembled in such a way that the male sections

of the pipes face down. Attach each of the sections to one another with three equidistant

metal screws. The pipes must be short and straight. All sections installed horizontally

must slope at least 1/4 inch per foot, with the lower section toward the stove.

Installation of a "barometric draft stabilizer" (fireplace register) on your smoke exhaust

system is prohibited. Furthermore, installation of a draft damper is recommended.