Drolet HUNTER DB00400 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Placa de cocción Drolet HUNTER DB00400. Drolet HUNTER DB00400 11 páginas. Wood heater and cook stove

Imprimir página

Couplings:

Once the unit is in place and the minimum clearances are respected, it must be coupled to

the chimney with a connector (commonly called "stove pipe").

Verify the clearance

between your stove pipe and the surrounding combustible material. If the standard

minimum 18-inch (457 mm) clearance cannot be obtained, you may use an insulated stove

pipe or a thermal protection shield. Read and respect the pipe manufacturer's instructions

before installation.

Your smoke evacuation system should be assembled in such a way that the male sections

of the pipes face down. Attach each of the sections to one another with three equidistant

metal screws. The pipes must be short and straight. All sections installed horizontally

must slope at least 1/4 inch per foot, with the lower section toward the stove.

Installation of a "barometric draft stabilizer" (fireplace register) on your smoke exhaust

system is prohibited. Furthermore, installation of a draft damper is recommended.