Drolo TWIN PEAKS V5 Schnellstart-Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Modulator Drolo TWIN PEAKS V5 herunter. Drolo TWIN PEAKS V5 4 Seiten. Tremolo

Seite drucken

TRS Expression

DC Power

Input

Supply

exp (trs)

sym

depth

tap tempo

multiplier

TWIN PEAKS

rate

tap switch

bypass switch:

The pedal uses a relay (true) bypass. and soft momentary switches.

If you give it a short tap (<0.3sec) it acts in latching mode.

If you press it for more than 0.3sec a you are in momentary mode.

tap tempo switch:

Tap in the desired tempo and use the multiplier switch to set its range.

Tip: If you tap the switch just once the LFO will reset to the start of the

wave cycle.

Audio

OUT

tone

gain

F B

env mode

env

bypass switch

rate:

Adjusts the rate of the LFO. You can set its range with the multiplier

switch.

tap tempo multiplier switch:

Allows you to set the range of the manually adjusted rate or multiply the

tapped tempo by 1, 2 or 4.

env:

Adjusts the sensitivity of the envelope detector that will affect the LFO

rate. The higher you set it, the more your playing will vary the LFO rate.

env mode:

If set to the middle, it deactivates the envelope detector.

If set to up: The rate will increase as the signal incresases.

If set to down: The rate will decrease as the signal increases.

sym:

The symmetry knob allows you to skew the shape of the LFO to the left

or the right. When using the square wave, you can set the length of the

"off" in regards to the "on" periods.

depth:

Sets the depth of the modulation.

Tip: if you turn depth completely down, you can use the pedal as a filter

using the tone knob and even have a substancial boost available, adjustable

with the gain knob.

tone:

Adjusts the balance between the bass and treble signals.

gain:

Adjusts the overall volume. Unity gain should be around noon.