Drolo TWIN PEAKS V5 Skrócona instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Modulator Drolo TWIN PEAKS V5. Drolo TWIN PEAKS V5 4 stron. Tremolo

Drukuj stronę
TRS Expression
DC Power
Input
Supply
exp (trs)
9v
sym
depth
tap tempo
4
2
multiplier
1
TWIN PEAKS
rate
tap switch
bypass switch:
The pedal uses a relay (true) bypass. and soft momentary switches.
If you give it a short tap (<0.3sec) it acts in latching mode.
If you press it for more than 0.3sec a you are in momentary mode.
tap tempo switch:
Tap in the desired tempo and use the multiplier switch to set its range.
Tip: If you tap the switch just once the LFO will reset to the start of the
wave cycle.
Audio
Audio
OUT
IN
tone
gain
F B
V
T
env mode
env
bypass switch
rate:
Adjusts the rate of the LFO. You can set its range with the multiplier
switch.
tap tempo multiplier switch:
Allows you to set the range of the manually adjusted rate or multiply the
tapped tempo by 1, 2 or 4.
env:
Adjusts the sensitivity of the envelope detector that will affect the LFO
rate. The higher you set it, the more your playing will vary the LFO rate.
env mode:
If set to the middle, it deactivates the envelope detector.
If set to up: The rate will increase as the signal incresases.
If set to down: The rate will decrease as the signal increases.
sym:
The symmetry knob allows you to skew the shape of the LFO to the left
or the right. When using the square wave, you can set the length of the
"off" in regards to the "on" periods.
depth:
Sets the depth of the modulation.
Tip: if you turn depth completely down, you can use the pedal as a filter
using the tone knob and even have a substancial boost available, adjustable
with the gain knob.
tone:
Adjusts the balance between the bass and treble signals.
gain:
Adjusts the overall volume. Unity gain should be around noon.