AnkerWork H300 Faq - Seite 2

Blättern Sie online oder laden Sie pdf Faq für Kopfhörer AnkerWork H300 herunter. AnkerWork H300 5 Seiten.
Auch für AnkerWork H300: Grundlegende Bedienung (8 seiten)

Seite drucken
macOS:
- System: Select "AnkerWork H300 Mono Headset" for input and output.
- Conferencing software: Select "AnkerWork H300 Mono Headset" for input and output.
2. Dongle mode:
- Windows & macOS: Select "Anker Soundsync" for input and output.
- Conferencing software: Select ""Anker Soundsync"" for input and output.
3. Wired mode:
- Windows & macOS: Select "AnkerWork H300 Mono Headset" for input and output.
- Conferencing software: Select "AnkerWork H300 Mono Headset" for input and output.
How do I connect AnkerWork H300 to a second device?
After the headset is connected to the first device via Bluetooth or dongle, toggle the power
button to the Bluetooth position and hold for 2 seconds until the indicator flashes blue quickly.
The headset will enter multipoint pairing mode. Search for AnkerWork H300 Mono Headset
on the second device and pair.

Additional Operation

How do I turn off the voice prompt for "mic muted" and "mic unmuted"?
To turn off the voice prompt, go to the AnkerWork App Settings, and then click the button
beside the Voice Prompts.
How do I adjust the auto shutdown time?
To adjust the auto shutdown time, go to the AnkerWork App Settings and click "Auto
Shutdown."
How do I see which devices are connected to AnkerWork H300?
After connecting the headset via Bluetooth or a dongle, open the AnkerWork app. Go to
Connections to see connected devices and a history of paired devices.
Note: You can disconnect devices via the AnkerWork app.
Button Issues
Why does the volume button not work?
The volume buttons only work during cals or when audio is playing.
Why can't I mute the headset by the mic boom or the mute button?
1. You can only mute or unmute during calls.
2. Your conferencing software takes priority. Check the mute button in your software first,
followed by raising the mic boom.
The mute button only works when your software is unmuted and the mic boom is lowered.