anko 404201 Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Blender anko 404201 herunter. anko 404201 15 Seiten. Vacuum blender

anko 404201 Benutzerhandbuch
Pulse
In this program, the blender works at the highest speed as long as the button is held
pressed. At the same time, all the speed status display lights will light up until the pulse
button is released from being pressed. To remove the jar, pull up the Filter Cap
Lock/Release Paddle to open the Upper Cover and rotate the blending jar anticlockwise to
remove from the base.
Note: If Pulse button is pressed for more than 25 seconds, the machine will enter to
standby mode automatically.
Note: Do not blend dry ingredients (for example pepper, beans, corn or star anise)
Min-Max (Speed Control Dial for Blending)
IMPORTANT! The maximum operating time per cycle must not exceed 2 minutes 30
second. Allow minimum 5 minutes rest time between two consecutive cycles to
prevent damage to the electric motor. The appliance must rest for at least 1 hour
after 10 cycles.
This program is for continuous adjustment of the blending speed. Min means the motor
works at the lowest speed. Max means motor works at the highest speed.
Turn the rotary selector to ON, the appliance will enter the standby mode with program
indicator lights (on, ice, v-blend, vacuum will light up) to indicate that the appliance is ready
for use.
Rotate the rotary selector clockwise to the required speed level. The higher the speed, the
more speed status display lights will be lit. The maximum working time is 2 minutes and 30
seconds. To remove the jar, pull up the Filter Cap Lock/Release Paddle to open the Upper
Cover and rotate the blending jar anticlockwise to remove from the base.
Please note:
-
If there is no function selected or disconnecting the blender from mains power, the
vacuum blender will enter sleep mode and all indicator lights will go off. During sleep
mode, pressing any function button will wake the blender and go into standby mode.
-
When the blender is not in use, turn the rotary selector to OFF, disconnect the blender
from mains power. Always keep the blender in a clean and dry environment after use
and when storing.
-
Do not blend dry ingredients (for example pepper, beans, corn or star anise)
TIPS & TRICKS
1. Do not add liquids or foods above 40℃.
2. Do not blend tough or hard foods without adding sufficient liquid.
3. Do not blend dry ingredients (for example pepper, beans, corn or star anise)
4. Do not put more than 1500ml (ref fig. 1) of liquid in the blending jar, especially when
blending at a high speed.
8