anko 404201 Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Блендер anko 404201. anko 404201 15 страниц. Vacuum blender

Pulse

In this program, the blender works at the highest speed as long as the button is held

pressed. At the same time, all the speed status display lights will light up until the pulse

button is released from being pressed. To remove the jar, pull up the Filter Cap

Lock/Release Paddle to open the Upper Cover and rotate the blending jar anticlockwise to

remove from the base.

Note: If Pulse button is pressed for more than 25 seconds, the machine will enter to

standby mode automatically.

Note: Do not blend dry ingredients (for example pepper, beans, corn or star anise)

Min-Max (Speed Control Dial for Blending)

IMPORTANT! The maximum operating time per cycle must not exceed 2 minutes 30

second. Allow minimum 5 minutes rest time between two consecutive cycles to

prevent damage to the electric motor. The appliance must rest for at least 1 hour

after 10 cycles.

This program is for continuous adjustment of the blending speed. Min means the motor

works at the lowest speed. Max means motor works at the highest speed.

Turn the rotary selector to ON, the appliance will enter the standby mode with program

indicator lights (on, ice, v-blend, vacuum will light up) to indicate that the appliance is ready

for use.

Rotate the rotary selector clockwise to the required speed level. The higher the speed, the

more speed status display lights will be lit. The maximum working time is 2 minutes and 30

seconds. To remove the jar, pull up the Filter Cap Lock/Release Paddle to open the Upper

Cover and rotate the blending jar anticlockwise to remove from the base.

Please note:

If there is no function selected or disconnecting the blender from mains power, the

vacuum blender will enter sleep mode and all indicator lights will go off. During sleep

mode, pressing any function button will wake the blender and go into standby mode.

When the blender is not in use, turn the rotary selector to OFF, disconnect the blender

from mains power. Always keep the blender in a clean and dry environment after use

and when storing.

Do not blend dry ingredients (for example pepper, beans, corn or star anise)

TIPS & TRICKS

1. Do not add liquids or foods above 40℃.

2. Do not blend tough or hard foods without adding sufficient liquid.

3. Do not blend dry ingredients (for example pepper, beans, corn or star anise)

4. Do not put more than 1500ml (ref fig. 1) of liquid in the blending jar, especially when

blending at a high speed.