Absolare Hybrid Stereo Amplifier Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Absolare Hybrid Stereo Amplifier herunter. Absolare Hybrid Stereo Amplifier 11 Seiten.
Seite drucken
1. General Description
The Absolare Hybrid Stereo Amplifier is a tube input / solid state output hybrid
design, dual-mono stereo amplifier. The single ended tube input section is inspired
by the Absolare Preamplifier using two 12AU7/ECC82 (or compatible) tubes. The
output section is all solid-state.
2. Safety Issues and Warnings
- Be sure the voltage setting of the unit matches the applied voltage to power
input. Operating voltage is fixed and must only be changed by an authorized service
agent.
- Do not connect unbalanced subwoofer input terminals to speaker outputs!
Absolare Hybrid Stereo Amplifier has a balanced output stage. Neither of the
speaker output terminals should be connected to ground. Doing so may permanently
damage the amplifier. Please consult your dealer about correct subwoofer
connection.
- This Amplifier is not bridgeable.
- Do not short circuit the speaker terminals. The output is protected for short
circuits, but speaker damage may occur from electrical pulses when the connectors
touch to each other.
- Do not touch tubes while operating. Tubes are extremely hot devices and
contain very high voltages.
- Do not open bottom covers. There are no user serviceable parts inside the unit.
4
ABSOLARE Hybrid Stereo Amplifier User Manual 1.2