Absolare Hybrid Stereo Amplifier Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat Absolare Hybrid Stereo Amplifier. Absolare Hybrid Stereo Amplifier 11 halaman.

1. General Description

The Absolare Hybrid Stereo Amplifier is a tube input / solid state output hybrid

design, dual-mono stereo amplifier. The single ended tube input section is inspired

by the Absolare Preamplifier using two 12AU7/ECC82 (or compatible) tubes. The

output section is all solid-state.

- Be sure the voltage setting of the unit matches the applied voltage to power

input. Operating voltage is fixed and must only be changed by an authorized service

agent.

- Do not connect unbalanced subwoofer input terminals to speaker outputs!

Absolare Hybrid Stereo Amplifier has a balanced output stage. Neither of the

speaker output terminals should be connected to ground. Doing so may permanently

damage the amplifier. Please consult your dealer about correct subwoofer

connection.

- This Amplifier is not bridgeable.

- Do not short circuit the speaker terminals. The output is protected for short

circuits, but speaker damage may occur from electrical pulses when the connectors

touch to each other.

- Do not touch tubes while operating. Tubes are extremely hot devices and

contain very high voltages.

- Do not open bottom covers. There are no user serviceable parts inside the unit.

ABSOLARE Hybrid Stereo Amplifier User Manual 1.2