Absolare Integrated Amplifier Benutzerhandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Absolare Integrated Amplifier herunter. Absolare Integrated Amplifier 11 Seiten.
Seite drucken
6. Operating the Unit
6.1. General Operation
Before turning on the Absolare Integrated Amplifier, be sure that all tubes are
installed and all cables are connected securely.
After turning the Amplifier on, the power indicator LED on the front face plate will
start to blink. You will not hear any sound until the indicator LED stops blinking to
illuminate continuously which indicates all the capacitors are charged and internal
voltages are stabilized.
The Absolare Integrated Amplifier will be ready to operate approx. 40 seconds after
turning on the power but attain full performance after 15 to 30 minutes.
6.2. Setting the Volume Level
The Absolare Integrated Amplifier has a 48-step motorized attenuator with IR remote
control. You can either set the volume level by turning the right-hand side knob or via
remote control. Operating angle of the remote control unit is about 45°.
6.3. Input Transformer Switch (GAIN)
If you have XLR (balanced) version, there is an input transformer by-pass switch on
the back plate. The 4:1 input transformer is active when the switch is in the 'DOWN'
position, inactive when the switch is in the 'UP' position.
8
ABSOLARE Integrated Amplifier User Manual 1.2