- ページ 8

アンプ Absolare Integrated AmplifierのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Absolare Integrated Amplifier 11 ページ。

6. Operating the Unit

Before turning on the Absolare Integrated Amplifier, be sure that all tubes are

installed and all cables are connected securely.

After turning the Amplifier on, the power indicator LED on the front face plate will

start to blink. You will not hear any sound until the indicator LED stops blinking to

illuminate continuously which indicates all the capacitors are charged and internal

voltages are stabilized.

The Absolare Integrated Amplifier will be ready to operate approx. 40 seconds after

turning on the power but attain full performance after 15 to 30 minutes.

The Absolare Integrated Amplifier has a 48-step motorized attenuator with IR remote

control. You can either set the volume level by turning the right-hand side knob or via

remote control. Operating angle of the remote control unit is about 45°.

6.3. Input Transformer Switch (GAIN)

If you have XLR (balanced) version, there is an input transformer by-pass switch on

the back plate. The 4:1 input transformer is active when the switch is in the 'DOWN'

position, inactive when the switch is in the 'UP' position.

ABSOLARE Integrated Amplifier User Manual 1.2