DSC PC4936 Gebrauchsanweisung - Seite 2
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Sicherheitssystem DSC PC4936 herunter. DSC PC4936 4 Seiten.
Auch für DSC PC4936: Anweisungen (4 seiten)
Seite drucken
Answering the Doorbell
Your system may have one or
more
doorbell
shown at left).
The doorbell station has only
one button, a call button. Door-
bell stations cannot receive
pages, monitor or receive tele-
phone calls.
To use the doorbell station:
Press the button on the station. All the inte-
rior audio stations will chime. If you have 2
doorbell stations in different locations, they
may activate different chimes. This will help
you identify where the call is coming from.
To answer a doorbell call:
Press
on any interior audio station.
A private communication link is established
between the doorbell station and the audio
station that answered.
Answering the Doorbell "Hands
Free"
If your system has been set up to allow
hands free responses to doorbells, all audio
stations will have 30 seconds to communi-
cate with the doorbell station which initiated
the page.
To respond to a doorbell "hands free":
When you hear the doorbell, talk into the
closest audio station. You do not need to
press the Page/Answer button.
To talk longer than 30 seconds:
Before the 30 seconds are up, briefly press
on the closest audio station to
establish a private communication link.
CAUTION: Do not hold the Page/Answer but-
ton for more than 1 second, to avoid acciden-
tally opening the door (see Opening the Door).
NOTE: The "hands free" feature will not work
if there is already a page in progress, a tele-
phone call is in progress or if the monitor fea-
ture is active.
Doorbell While on Page
If a page is in progress when a doorbell is
stations
(as
pressed, only the two persons on the page
will hear the doorbell tone.
To answer the doorbell while on page:
Either person can press
audio station.
The page is disconnected and the person who
pressed the Page/Answer button is immedi-
ately connected to the doorbell station.
Opening the Door (Using Doorstrike)
If your system has been set up for doorstrike
operation, when you answer a call from a
doorbell station, you can open the door near
the doorbell.
To open the door:
Press and hold
audio station for 2 seconds.
The system sounds an acknowledgement
beep and the door opens.
Monitoring
You can use the Monitor feature to broadcast
one interior audio station to all the other
interior audio stations on the premise. For
example, this may be useful for monitoring a
baby in a room.
Interior audio stations can still be used to ini-
tiate/answer pages, annunciate and answer the
doorbell and answer telephone calls. If a con-
versation is in progress, the Monitor feature
will not operate until the conversation is ended.
To turn on the monitor feature:
1. Go to the audio station in the room you
2. Press and hold
want to monitor.
seconds. The Do Not Disturb light
flashes and the station is put in Monitor
mode. All sound in the room will be
transmitted to all the other interior
audio stations.
on their
on the interior
for at least 2