DSC PC4936 Gebrauchsanweisung - Seite 4

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Sicherheitssystem DSC PC4936 herunter. DSC PC4936 4 Seiten.
Auch für DSC PC4936: Anweisungen (4 seiten)

Seite drucken

Limited Warranty

Digital Security Controls Ltd. warrants that for a period of twelve

months from the date of purchase, the product shall be free of defects

in materials and workmanship under normal use and that in fulfil-

ment of any breach of such warranty, Digital Security Controls Ltd.

shall, at its option, repair or replace the defective equipment upon

return of the equipment to its factory. This warranty applies only to

defects in parts and workmanship and not to damage incurred in

shipping or handling, or damage due to causes beyond the control of

Digital Security Controls Ltd. such as lightning, excessive voltage,

mechanical shock, water damage, or damage arising out of abuse,

alteration or improper application of the equipment.

The foregoing warranty shall apply only to the original buyer, and is

and shall be in lieu of any and all other warranties, whether

expressed or implied and of all other obligations or liabilities on the

part of Digital Security Controls Ltd. This warranty contains the

FCC COMPLIANCE STATEMENT

CAUTION: Changes or modifications not expressly approved by Digital Security

Controls Ltd. could void your authority to use this equipment.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential instal-

lation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be deter-

mined by turning the equipment off and on, the user is encouraged to try to cor-

rect the interference by one or more of the following measures:

o Re-orient the receiving antenna.

o Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

o Increase the separation between the equipment and receiver.

o Consult the dealer or an experienced radio/television technician for help.

The user may find the following booklet prepared by the FCC useful: "How to

Identify and Resolve Radio/Television Interference Problems". This booklet is

available from the U.S. Government Printing Office, Washington D.C. 20402,

Stock # 004-000-00345-4.

IMPORTANT INFORMATION

This equipment complies with Part 68 of the FCC Rules. On the side of this equip-

ment is a label that contains, among other information, the FCC registration num-

ber of this equipment.

NOTIFICATION TO TELEPHONE COMPANY The customer shall notify the

telephone company of the particular line to which the connection will be made,

and provide the FCC registration number and the ringer equivalence of the pro-

tective circuit.

FCC Registration Number: F53CAN-31477-KX-N

Ringer Equivalence Number: 0.1B USOC Jack: RJ31X

Facility Interface Code: 02LS2 Service Order Code: 9.0F

TELEPHONE CONNECTION REQUIREMENTS Except for the telephone com-

pany provided ringers, all connections to the telephone network shall be made

through standard plugs and telephone company provided jacks, or equivalent, in

such a manner as to allow for easy, immediate disconnection of the terminal

equipment. Standard jacks shall be so arranged that, if the plug connected thereto

is withdrawn, no interference to the operation of the equipment at the customer's

premises which remains connected to the telephone network shall occur by reason

of such withdrawal.

entire warranty. Digital Security Controls Ltd. neither assumes, nor

authorizes any other person purporting to act on its behalf to modify

or to change this warranty, nor to assume for it any other warranty or

liability concerning this product.

In no event shall Digital Security Controls Ltd. be liable for any direct

or indirect or consequential damages, loss of anticipated profits, loss

of time or any other losses incurred by the buyer in connection with

the purchase, installation or operation or failure of this product.

Warning: Digital Security Controls Ltd. recommends that the entire

system be completely tested on a regular basis. However, despite fre-

quent testing, and due to, but not limited to, criminal tampering or

electrical disruption, it is possible for this product to fail to perform as

expected.

INCIDENCE OF HARM Should terminal equipment or protective circuitry cause

harm to the telephone network, the telephone company shall, where practicable,

notify the customer that temporary disconnection of service may be required;

however, where prior notice is not practicable, the telephone company may tem-

porarily discontinue service if such action is deemed reasonable in the circum-

stances. In the case of such temporary discontinuance, the telephone company

shall promptly notify the customer and will be given the opportunity to correct

the situation.

ADDITIONAL TELEPHONE COMPANY INFORMATION The security control

panel must be properly connected to the telephone line with a USOC RJ-31X tele-

phone jack.

The FCC prohibits customer-provided terminal equipment be connected to party

lines or to be used in conjunction with coin telephone service. Interconnect rules

may vary from state to state.

CHANGES IN TELEPHONE COMPANY EQUIPMENT OR FACILITIES The tele-

phone company may make changes in its communications facilities, equipment,

operations or procedures, where such actions are reasonably required and proper

in its business. Should any such changes render the customer's terminal equip-

ment incompatible with the telephone company facilities the customer shall be

given adequate notice to the effect modifications to maintain uninterrupted ser-

vice.

RINGER EQUIVALENCE NUMBER (REN) The REN is useful to determine the

quantity of devices that you may connect to your telephone line and still have all

of those devices ring when your telephone number is called. In most, but not all

areas, the sum of the RENs of all devices connected to one line should not exceed

five (5.0). To be certain of the number of devices that you may connect to your

line, you may want to contact your local telephone company.

EQUIPMENT MAINTENANCE FACILITY If you experience trouble with this

telephone equipment, please contact the facility indicated below for information

on obtaining service or repairs. The telephone company may ask that you discon-

nect this equipment from the network until the problem has been corrected or

until you are sure that the equipment is not malfunctioning.

Digital Security Controls Ltd. 160 Washburn St., Lockport, NY 14094

Printed in Canada 29003578 R0