DSC PC51O Installationshandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Installationshandbuch für Sicherheitssystem DSC PC51O herunter. DSC PC51O 20 Seiten. Pc51o
Auch für DSC PC51O: Gebrauchsanweisung (16 seiten)

Seite drucken

[8]

[F], [A] and [P] Key Alarms: The PGM output switches to ground when any of the keypad alarms are

generated by pressing the [F], [A] or [P] Keys. The PGM output will be activated until the Bell Cut-off time

expires or until an Access Code is entered.

Arm/Disarm Status: The PGM is activated when the system is armed and remains activated throughout

[9]

the armed period. When the system is disarmed, the PGM output will be deactivated.

[5]

1st System Option Code

When Section [5] is entered, the 4 Zone Lights will indicate which options are selected.

To select an option, press a number from [1] to [4]. If the light indicating the option was OFF, it will come ON;

if the light indicating the option was ON, it will go OFF.

LIGHT

[1]

ON =

• OFF =

[2] • ON =

OFF =

[3]

ON =

• OFF =

[4] • OFF =

• Factory default settings

Notes on [P] Key Operation

If the [P] Key is programmed as a silent alarm, it is suggested that one of the Programmable Outputs be

programmed with Option 3, Option 4, or Option 8 so that an output is activated when the [P] Key is pressed.

The Programmable Output may be used to activate special lighting or a bell or siren other than the one

connected to the control panel.

If the [P] Key is not to activate a Programmable Output, do not program the [P] Key as a silent alarm. If enabled

but not set to activate a Programmable Output or sound an alarm, no alarm will be generated when the [P] Key

is pressed. Ensure that the user is made fully aware of how the [F], [A] and [P] Keys function on their system.

Notes on KEY Terminal Options

When Light [3] is ON, the KEY Terminal will function as a Tamper Zone.

When Light [3] if OFF (the default setting), the KEY Terminal will be used for Keyswitch Operation.

When used as a Tamper Zone, the KEY Terminal functions as a regular burglary zone. If PGM1 or PGM2 are

programmed with Programmable Output Option [4] Burglar Alarm / [P] Key, the output will be activated if an

alarm is generated on the KEY Terminal.

Momentary-contact Keyswitch Arming

Maintained-contact Keyswitch Arming

[P] Key silent

[P] Key audible

KEY Terminal operates as Tamper Zone

KEY Terminal used for Keyswitch Operation

For Future Use