3M Litmann Quality 3100 Anleitung Handbuch - Seite 12
Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Medizinische Ausrüstung 3M Litmann Quality 3100 herunter. 3M Litmann Quality 3100 16 Seiten. Mining cable splice kit
Auch für 3M Litmann Quality 3100: Schnellstart-Handbuch (2 seiten)
Seite drucken
10.0 Jacketing the Splice
10.1
Bundle cable assembly and bind with 3M
Starting half way up the tapers, wrap half-lapped layers of Scotch
Rubber Splicing Tape 130C (tacky side DOWN), building up and across the
splice until 130C tape is equal to or greater than original jacket thickness and
extends 1" (25 mm) past the top of jacket tapers.
10.2
Start 2" (50 mm) beyond 130C tape, wrap one half-lapped layer of Scotch
Heavy Duty Mining Tape 31 with mastic side toward the cable extending 2"
(50 mm) beyond the 130C tape on the opposite end. Always wrap the 31 tape
toward the machine end of the cable.
Start taping here
2" (50 mm)
past end of
previous layer
10.3
Starting 1" (25 mm) past the 31 tape, apply 3 half-lapped layers of 1700P tape to
each end to temporarily secure the ends of the 31 tape until the tape reaches full
bond.
1"
(25 mm)
1" (25 mm)
past end of taper
Scotch
Tacky Side DOWN
Scotch
(Mastic side toward cable)
3M
Temflex
™
™
Temflex
™
past end of taper
Linerless Rubber Splicing Tape 130C
®
Figure 25
Machine End
Heavy Duty Mining Tape 31
®
Figure 26
Vinyl Electrical Tape 1700P
Figure 27
12
Vinyl Electrical Tape 1700P.
™
Linerless
®
1" (25 mm)
1"
(25 mm)
78-8127-6830-3-C
®
2" (50 mm)
past end of
previous layer