3M Litmann Quality 3100 사용 설명서 - 페이지 12

{카테고리_이름} 3M Litmann Quality 3100에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M Litmann Quality 3100 16 페이지. Mining cable splice kit
3M Litmann Quality 3100에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

10.0 Jacketing the Splice

10.1

Bundle cable assembly and bind with 3M

Starting half way up the tapers, wrap half-lapped layers of Scotch

Rubber Splicing Tape 130C (tacky side DOWN), building up and across the

splice until 130C tape is equal to or greater than original jacket thickness and

extends 1" (25 mm) past the top of jacket tapers.

10.2

Start 2" (50 mm) beyond 130C tape, wrap one half-lapped layer of Scotch

Heavy Duty Mining Tape 31 with mastic side toward the cable extending 2"

(50 mm) beyond the 130C tape on the opposite end. Always wrap the 31 tape

toward the machine end of the cable.

Start taping here

2" (50 mm)

past end of

previous layer

10.3

Starting 1" (25 mm) past the 31 tape, apply 3 half-lapped layers of 1700P tape to

each end to temporarily secure the ends of the 31 tape until the tape reaches full

bond.

(25 mm)

1" (25 mm)

past end of taper

Scotch

Tacky Side DOWN

Scotch

(Mastic side toward cable)

Temflex

™

Temflex

™

past end of taper

Linerless Rubber Splicing Tape 130C

Figure 25

Machine End

Heavy Duty Mining Tape 31

Figure 26

Vinyl Electrical Tape 1700P

Figure 27

Vinyl Electrical Tape 1700P.

™

Linerless

1" (25 mm)

(25 mm)

78-8127-6830-3-C

2" (50 mm)

past end of

previous layer