3M Litmann Quality 3100 사용 설명서

{카테고리_이름} 3M Litmann Quality 3100에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M Litmann Quality 3100 16 페이지. Mining cable splice kit
3M Litmann Quality 3100에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

Mining Cable Splice Kit 3100

™

Instructions

Kit Contents:

1 Scotch

Heavy Duty Mining Tape 31, 2" x 8.5'

1 Scotch

Linerless Rubber Splicing Tape 130C, 1½" x 30'

1 3M

™

Temflex

™

Vinyl Electrical Tape 1700P, 1½" x 44'

1 3M

™

Cable Cleaning Preparation Kit CC-2-Dry

1 Instruction Sheet

Note: Scotch

Linerless Rubber Splicing Tape 130C is applied highly-stretched with

tacky side DOWN.

Technical Information:

For use on 2, 3 or 4-Conductor Flat Type W, G or G-GC

3 or 4-Conductor Round Type W, G or G-GC

#6 AWG–1/0 AWG (14-50 mm

600 V–2 kV

Cables up tp 500 kcmil (250 mm

Mine Safety and Health Administration Acceptance:

P-07-KA080005/00-MSHA

DANGER

Before attempting any cable repairs, make sure that the proper cable is

disconnected, locked out and suitably tagged.

CAUTION

Working around energized systems may cause serious injury or death. Installation

should be performed by personnel familiar with good safety practice in handling

electrical equipment. De-energize and ground all electrical systems before installing

product.

August 2009

78-8127-6830-3-C

)

) will require the use of additional tapes.

