DSC PowerSeries PC1832 Installationshandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Installationshandbuch für Sicherheitssystem DSC PowerSeries PC1832 herunter. DSC PowerSeries PC1832 20 Seiten. System
enhancement
module
Auch für DSC PowerSeries PC1832: Installationshandbuch (17 seiten), Installationshandbuch (13 seiten), Handbuch (18 seiten)
Seite drucken
STEP 4: MOUNT THE SEM
You must be free of static electricity before handling electronic
components. Touch a grounded metal surface before touching
the circuit board.
Press down on the bottom tabs of the enclosure cover to remove it
and set it aside.
Carefully remove the SEM circuit board by depressing the interior
bottom tab.
Place the SEM back plate on the wall at the desired mounting
location and mark the three mounting holes as shown below.
Set the back plate aside and drill holes at the mounting locations.
Use wall anchors where studs are not present and secure the back
plate to the wall with the enclosed screws.
Insert the SEM circuit board back into the back plate.
7