DSC PowerSeries PC1832 Manual de instalación - Página 7
Navegue en línea o descargue pdf Manual de instalación para Sistema de seguridad DSC PowerSeries PC1832. DSC PowerSeries PC1832 20 páginas. System
enhancement
module
También para DSC PowerSeries PC1832: Manual de instalación (17 páginas), Manual de instalación (13 páginas), Manual (18 páginas)
Imprimir página
STEP 4: MOUNT THE SEM
You must be free of static electricity before handling electronic
components. Touch a grounded metal surface before touching
the circuit board.
Press down on the bottom tabs of the enclosure cover to remove it
and set it aside.
Carefully remove the SEM circuit board by depressing the interior
bottom tab.
Place the SEM back plate on the wall at the desired mounting
location and mark the three mounting holes as shown below.
Set the back plate aside and drill holes at the mounting locations.
Use wall anchors where studs are not present and secure the back
plate to the wall with the enclosed screws.
Insert the SEM circuit board back into the back plate.
7