DSPPA MP1715T Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für MP3-Spieler DSPPA MP1715T herunter. DSPPA MP1715T 20 Seiten. Mp3 timing player

Seite drucken

On the "system setting" interface, it is possible

to carry out the operations including the

timing programming, download of timing

point, setting of backlight status, selection of

language, setting of early turn-on of timing

power and the adjustment of the system time.

3.1 Adjustment of date and time

On the buttons at the bottom of the "system

setting" interface, the current date and time are

displayed respectively; when adjusting the

date and time, it is allowed to click directly the

button displaying the value to be set to pop up

the numeric keypad, and then enter the target

digit to be adjusted and click the "OK" button

to complete the operation. As shown in the

following diagram (Next page), it is required

to enter four digits for year such as year 2012.

It is required to enter two digits for month, day

and time; for example, it is required to enter

digit 06 for June. If the wrong digit is entered,

use the "Reset" button to reset and reenter the

correct digit. After the setting, such setting is

invalid unless the "OK" button is clicked. If

clicking "reset" button, the original digit is

kept constantly.

Figure 3.2 Setting of System Time

The above figure illustrates the year to be set.

The character on the year button in red

represents that the year is being set; after

completing the setting and exiting from the

numeric keypad, it is displayed in white. If it is

impossible to confirm after completing the

setting, it means that the entered digit goes

beyond the digital scope of year, month and

day.

3.2 Setting of backlight status

Such operation is used to select the lightening

time of the backlight of the screen. There are

the two options including "normally alight"

and "automatic". "Normally alight" means that

the backlight of the screen has always been the

alight state within the period from the

power-on to the power-off of the equipment;

"automatic" means that if there is no operation

to the equipment within certain period of time

after turning on the power and starting up the

equipment, the backlight of the screen will go

out automatically and will be lightened in case

of any operation so as to save the energy.

As shown in the following diagram, when

setting, just click the backlight state button to

complete the operation.

Figure 3.3 Indication of Backlight Button

It is recommended to set backlight as

"automatic" if the equipment will not be used

for a long period of time so as to extend the

service life of the screen.

3.3 Selection of language

There are two optional languages, i.e. Chinese

and English for captions displayed in the

equipment. On the "system setting" interface,

click the language display button directly, and

the captions displayed on the interface are

converted

into

immediately without the need for restarting of

the equipment as shown in the following

diagram:

MP3 Timing Player

Backlight state display

button

the

required

language