DSPPA MP1715T Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für MP3-Spieler DSPPA MP1715T herunter. DSPPA MP1715T 20 Seiten. Mp3 timing player

Seite drucken

Operation instructions

1.

Startup

Connect the power line into the grid, and then
turn on the power switch (POWER) on the
front panel of the equipment to start up the
system for about 5 seconds. After the startup,
the information played prior to the previous
shutdown is loaded, and the following
interface is visible on the display screen:
Figure 1.1 Main Interface
The functions on the interface:
1
2
3
9
10
11
12 13
Figure 1.2 Introduction to Functions of Main
Interface
1. Display of current date and time of
system
It is allowed to adjust the time and date in the
"system setting".
2. SD card program source selection button
As the program source of the timing point, it is
not advisable to pull out / plug in and change
4
5
6
7
8
14
15
16
the program once the SD card is plugged in.
3. U-disc program source selection button
When selecting the USB program source or
SD card program source, the character on the
buttons will be shown in red.
4. Manual control button of AC 220V
output power switch
This button is used to control the temporary
on-off state of the output power; if the timing
point is coming, the setting in the timing point
shall prevail.
5. Programmed control / manual control
switching button
In the state of programmed control, the
character on such button is shown in red; in
the manual state, it is shown in white. When
the character on the button is shown in white
in the manual state, it is impossible to
implement the timing point edited in advance.
Be sure to keep in mind that after editing the
timing point, it is necessary to adjust this
button to the state of "programmed control".
6. Operation button for display of previous
screen in program list
This button is used to display the program list
by page up and page down.
7. Program list
Display the program in the list on the SD card
or U-disc and other memories, select a
program and press the Play/Pause button to
play from the first program in the default state.
8. Operation button for display of next
screen in program list
This button is used to display the program list
by page up and page down.
9. Directory list
Display the inventory of program on the SD
card or U-disc and other memories, select a
directory, and the programs under such
inventory will be displayed on the box ⑦ at
the right side.
10. The display zone for the name of the
5
MP3 Timing Player