ATTI Shadow Tracker Premier Hardware-Handbuch - Seite 11
Blättern Sie online oder laden Sie pdf Hardware-Handbuch für GPS ATTI Shadow Tracker Premier herunter. ATTI Shadow Tracker Premier 16 Seiten. Vehicle tracking system
Auch für ATTI Shadow Tracker Premier: Hardware-Handbuch (16 seiten)
Seite druckenGPS Antenna
An active GPS antenna is required, and must be connected to the Shadow
Tracker™ Premier for GPS data collection to occur. Each Shadow
Tracker™ Premier comes equipped with an active, external magnetic-
mount GPS antenna. (An optional suction mount is also available.)
The GPS antenna should be placed in a location that provides adequate
reception of the GPS satellite signal. Upon initial power up, the unit may
take up to 10 minutes to acquire the satellite signal. After the Premier
unit is connected, powered on, and has acquired the satellite signal watch
the GPS LED light for several minutes to verify that the selected antenna
location is providing adequate continuous signal reception, the LED
should remain GREEN. If the LED changes to RED then you should try
moving the antenna to a different location until the LED remains GREEN
for several minutes.
For best tracking results, it is recommended that you mount the antenna
in a place that has an unobstructed view of the sky.
Warning: Attaching a passive GPS antenna will result in damage to this
device. Crimping or cutting the GPS antenna cable may cause
damage to the antenna and/or the Shadow Tracker™ Premier
unit.
Downloading GPS Data
The Shadow Tracker™ Premier unit does not require removal from the
5