ATTI Shadow Tracker Premier Hardware-Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Hardware-Handbuch für GPS ATTI Shadow Tracker Premier herunter. ATTI Shadow Tracker Premier 16 Seiten. Vehicle tracking system
Auch für ATTI Shadow Tracker Premier: Hardware-Handbuch (16 seiten)

Connecting Power

Careful attention should be given when making connections to the GPS
antenna and power connectors on the Shadow Tracker™ Premier mobile
tracking unit to prevent damage to the connectors.
The Shadow Tracker™ Premier unit uses the vehicle's electrical system for
its power source. The unit connects to the vehicles electrical system
using the included wiring harness part no. A-40266.

Wiring Instructions

Using the included wiring harness, part number A-40266, connect the
Shadow Tracker™ Premier unit to the vehicles electrical system as follows.
The RED wire must be connected to a CONSTANT 12-volt positive power
source; it MUST have power even when the vehicle is turned off. The
BLUE wire should be connected to a switched 12-volt power source, it
should have power ONLY when the vehicle is running and NOT when the
vehicle is turned off. This tells the Premier unit that the vehicle is turned
off verifying that the vehicle must be stopped. If you cannot locate a
switched power source then the BLUE wire must be connected to the
constant power source as the RED wire.
Note: If the BLUE wire is connected to a continuous power source then
the stop reporting may not be as accurate. The BLUE wire MUST be
connected to a power source, either constant or switched or the
Premier unit will NOT collect GPS data.
The BLACK wire must be connected to a 12-volt ground source.
Note: If the unit is left powered on and the vehicle is not driven for an
extended time period it is possible for the vehicles battery to be
drained to a point where the vehicle may have trouble starting. If
this happens over a normal two-day weekend there are steps that
can be taken to extend this vehicle idle time. Please contact ATTI
Tech Support for help in solving this type of problem. If the vehicle
is to be idle for an extended time period (i.e. maintenance or
repairs) you may wish to disconnect the Shadow Tracker™ Premier
3