DTC PB-5 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Transmitter DTC PB-5 herunter. DTC PB-5 16 Seiten. Beacon transmitter

OVERVIEW

EVENT MODE

While in Event mode, the PB-5 transmits confidence tones at a default rate of 30 second intervals. When the Break Wire is

broken (circuit is opened), the PB-5 will alert the agent that the package or door has been opened. The PB-5 quickly changes

the tone transmission to the easily recognized alarm signal. The alarm signal transmits twice per second.

BREAK WIRE INPUT

The break wire input on the PB-5 will detect a change-of-state. This means that you can use the break wire in the traditional

way and use a wire loop from the Break wire pin to the ground pin on the terminal strip. After the power is applied, if the loop

breaks the alarm will go off. If you want, you can use a normally-open switch as well; just connect the switch between the

Break wire and GROUND pins, and the alarm will go off if the switch is closed.

STANDBY WIRE

The standby wire input allows you to put the PB-5 into a standby mode. When a wire loop is connected between the

STANDBY pin and the ground pin on the terminal strip, before or during normal operation, the PB-5 will be on hold, no

confidence tones. This will preserve valuable battery power. When the STANDBY loop is broken the PB-5 will then begin

confidence tone transmissions and normal operation.

Note: Regardless of the standby wire loop condition, if break wire loop is broken the PB-5 will begin to alarm.

CONNECTIONS

Channel/Mode switch

There are ten user programmable modes selectable via the 10-position switch. The mode switch will only be read at power up

or upon re-initialization. Changing the mode switch while the unit is running will have no effect.

LED

The diagnostic LED on the PB-5 is on the top of the case, clearly marked. The LED will flash once on power up to indicate

that the transmitter has checked its memory and is ready for deployment. If the PB-5 senses an internal problem the LED will

flash three times.

DTC COMMUNICATIONS, INC.