DAMPP-CHASER Piano Life Saver System Installationsanleitung Handbuch
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Musikinstrument DAMPP-CHASER Piano Life Saver System herunter. DAMPP-CHASER Piano Life Saver System 9 Seiten. Backside vertical 8-part system which includes two humidifiers
Auch für DAMPP-CHASER Piano Life Saver System: Einbauanleitung (4 seiten), Installationsanleitung Handbuch (8 seiten), Pflege- und Wartungshinweise (2 seiten)
Seite drucken
TOOLS REQUIRED: Use either a #2 Phillips head driver or a 1/4-inch hexhead driver, as both types of screws are
included with this sysem. To install the system, you will need:
• racheting driver
• cordless drill
• small blade screwdriver
• wirecutters
The following is a list of components:
.
1
91 cm Dehumidifier
1
Humidistat
1
Humidifier
1
Water Sensor Probes
1
Humidifier Heater Bar
1
Two-light Panel
1
Watering tube
1
Humidifier pads
1
3 m Extension Power Cord
1
Moisture Distribution Baffle
1
Watering Can
1
Bottle of Humidifier Treatment
1
Hardware kit
1
System Care and Maintenance sheet / 5-Year Warranty Certificate
The hardware kit includes the following:
2
Y Hangers
13
13 mm #8 screws
2
19 mm #8 screws
3
5 mm clamps
2
13 mm standard clamps
2
Half clamps and serrated washers
6
6 mm clamps
2
Screw hooks
2
Wire ties and cable ties
4
Pin pegs
2
Plastic hanger C clips
1
"STOP, DO Not Unplug Label
1
Warranty Registration card
Smart Bracket package includes:
Smart Bracket Sensors
Single-Light Cube
While we make every effort to ensure all components are included, it is a good idea to check that none are missing prior to
arriving at the installation location. In the unlikely event that a part is missing, please call your supplier with information from
the end of the box and the assembler's name. The replacement part will be shipped to you without delay.
• screw starter
• small hammer
• chalk or other marker
(with attached extensions)
5-PART SYSTEM INSTALLATION INSTRUCTIONS
• scissors
• file
• measuring tape
Purpose
Removes excess moisture from the piano
Controls the Humidifier and Dehumidifier
Brings moisture into the piano
Measure water depth in Humidifier
Warms pads to aid evaporation
Shows System is energized and when to add water
Enables the delivery of water to the Humidifier
Used to vaporize moisture from the Humidifier
Connects Humidistat to electrical wall outlet
Dispenses moisture throughout the piano
For adding water to the Humidifier
Additive that prolongs the life of the pads
Described below
Used to suspend the Humidifier tank when necessary
Mounts clamps
Used to attach the light panel
Attaches wire between light panel and Humidistat
Attaches watering tube between keybed and Humidifier
Attaches the end of the watering tube to the rim
Anchors Humidistat power cord wire
Used to suspend the Humidifier when necessary. Used with Y Hangers
Used to bundle excess cords
Used to mount Dehumidifier and the Moisture Distribution Baffle
Used to mount the Humidistat on the Dehumidifier
Can be attached to power cord near wall outlet
Attaches to Humidifier heater bar and senses when pads are dry
Signals when Humidifier pads are dry
VERTICAL