Conairphone CID500 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schnurloses Telefon Conairphone CID500 herunter. Conairphone CID500 10 Seiten. Type i caller id phone with clock radio and cd player

Seite drucken

1. Additional Information

To Install Battery

1. Turn the unit over and open the battery door by

pulling back the latch using a ball-point pen.

2. Install a 4 AAA alkaline batteries (not included),

while making sure that the + and – ends match up

with those inside the battery compartment for

backup Caller ID memory.

3. Install a 9 volt alkaline battery (not included) for

backup clock and alarm time.

4. Close the battery compartment door and turn the

unit over.

NOTE: When the 9 volt battery is getting weak a BATT.

LO LED will light. When the 4 AAA batteries are getting

weak, the

icon will light up on the LCD CID

display. When either indicator or icon lights up, it is

important to change the batteries as soon as possible.

Adjustable Display

You can adjust the display panel to four different viewing

angles of your choice.

Adjustable Backlight

You can adjust the backlight (both the CID display and

clock display) to normal or high level using the DIMMER

HI/NORM switch at the right side of the unit.

NOTE: The backlight will turn off when there is no AC

power.

Adjustable Digital Volume

You can adjust the [Volume

] to select a

] or [Volume

suitable listening level when playing a CD or listening

to the radio.

SETTING UP CID500

Plug in the AC power cord before setting up the

unit.

DO NOT CONNECT the telephone line cord to the

wall outlet until the Caller ID setup has been

completed.

To Set the Language

The CID display shows 'ENTER LANGUAGE' followed

by a choice of 3 languages (English, Spanish, French).

If the CID display does not appear this way, press and

hold both [REVIEW ] and [REVIEW ] for 10 seconds.

1. The CID display then shows 'ENG ESP FRA'.

2. The 'ENG' is BLINKING. Press [REVIEW

[REVIEW ] to select 'ENG', 'ESP', or 'FRA'.

3. Press [DELETE] to confirm.

To Set the CID Display Contrast

1. The CID display shows 'LCD CONTRAST'.

2. Press [REVIEW ] or [REVIEW ] to adjust five

levels (from 1 to 5, default is 3) contrast of CID

display.

3. Press [DELETE] to confirm.

To Set the Area Code

1. The CID display shows 'ENTER AREA CODE'. The

first digit '–' of the area code will blink.

2. Press [REVIEW ] or [REVIEW ] to enter the area

code.

3. Press [DELETE] to confirm and go to the next entry.

4. Repeat steps 2 and 3 until 3-digit area code is set.

The CID display shows 'TOTAL:00 NEW:00', which

means both the total call and new call counter are zero.

TELEPHONE OPERATION

] or

Receiving a Call

When you receive a call, the phone rings and the NEW

CALL LED flashes. The CID display will show the name

and the caller's telephone number, if you want to talk

to the caller:

1. Pick up the handset to answer the call.

2. At the end of the call, return the handset to the

cradle.

NOTE: If your CD or radio is on, it will automatically be

muted when the handset is removed from the cradle.

Your CD or radio will resume playing after about 1 to 2

seconds when the handset is put back in the cradle.

Dialing a Call

1. Pick up the handset and wait for a dial tone.

2. Press the keypad for the telephone number you wish

to dial. The CID display will show the number that

you dialed on the keypad. If you dial a number over

14 digits long, it will show the last 14 digits only.

3. When you have completed your call, hang up the

handset to release the telephone line.

TELEPHONE FEATURES

Tone/Pulse Switch

Set switch to your type of service. If you don't know

whether you have tone or pulse:

1. Put the T/P switch on T.

2. When you have a dial tone, press any key on the

keypad. If the dial tone stops, leave it on T. If not,

change the setting to P.

Tone/Pulse Combination Dialing

Combination dialing is useful to subscribers of Pulse

(rotary) service who wish to gain access to various

low-cost long-distance or automated computer

services otherwise not available to them.

1. With the T/P switch in the P position, dial the phone

number.

2. Press [ ], and your telephone will change to Tone

dialing mode.

3. Dial your code/authorization number. When your call

is completed, your telephone will automatically

return to the Pulse dialing mode.

NOTE: Combination dialing can also be stored into

the memory for one-touch access to your long distance

or automated computer service.

Receiver Volume Control

The Receiver Volume Control is located on the side of

your handset. This enables you to adjust the receiver

volume on your telephone handset from high to normal

for a more comfortable listening level.

Ringer Off/Low/High

This unit features a harmonic dual tone ringer that can

be adjusted from a loud (HI) to a soft (LO) sound level.

When you don't want to be disturbed, slide the switch

to the OFF position. You can still make outgoing calls

without being disturbed by incoming calls.