Conairphone CID500 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schnurloses Telefon Conairphone CID500 herunter. Conairphone CID500 10 Seiten. Type i caller id phone with clock radio and cd player

Seite drucken

1. Additional Information

ERASING THE CALLER ID

INFORMATION

To Erase a Single Call in Memory

1. Press [REVIEW ] or [REVIEW ] for the Caller ID

memory location to be reviewed.

2. To clear a single Caller ID memory location, press

[DELETE] twice quickly.

3. The data for that call will be erased, and the CALL#

and Caller ID information will be updated.

To Erase All Calls in Memory

1. After all new message are reviewed, press and hold

[DELETE] for about 4 seconds. The message

'ERASE ALL CALL?' will appear to confirm your

action. Press [DELETE] to clear all the information,

then the message 'NO CALLS' will appear.

2. Both the total call and new call counters will become

zero.

NOTE: You need to view all new calls before erasing

all calls in memory.

CALL BACK (REDIAL) FROM THE

CALLER ID MEMORY

Option 1

1. With the handset hung up on the base press

[REVIEW ] or [REVIEW ] to find the Caller ID

memory location to be redialed.

2. Press [CALL BACK] twice to redial, the CID display

shows 'PICK UP CALL'.

Option 2

1. Pick up the handset to make your phone call.

2. Press [REVIEW ] or [REVIEW ] to find the Caller

ID memory location to be redialed. Press [CALL

BACK] twice, the number will then be dialed

automatically.

WHEN THE CALLER'S PHONE

NUMBER HAS A DIFFERENT

AREA CODE FROM THE PRESET:

The long distance dialing digit '1' will be inserted

automatically during Caller ID memory call back.

Press [CALL BACK], 11 digits number will blink. Press

[CALL BACK] again to confirm to dial the 11 digits

number.

WHEN THE CALLER'S PHONE

NUMBER HAS THE SAME AREA

CODE AS THE PRESET:

The long distance dialing digit '1' and the 3 digit area

code will be deleted automatically during Caller ID

memory call back.

Press [CALL BACK], 7 digit number will blink. Press

[CALL BACK] again to confirm to dial the 7 digit

number.

NOTE: Your telephone company may require a different

format for making out-of-area (toll) calls WITHIN your

area code. See the next section for the procedure to

obtain the applicable toll-call format for your phone

company.

WHEN YOUR TELEPHONE COMPANY REQUIRES

YOU TO DIAL OTHER THAN A 7-DIGIT NUMBER

(SAME AREA CODE) OR 11-DIGIT NUMBER

(DIFFERENT AREA CODE) TO MAKE TOLL CALLS

WITHIN YOUR AREA CODE, FOLLOW ONE OF THE

4 OPTIONS BELOW FOR CALLER ID CALL BACK.

Option 1

1+Area Code+7-Digit Number (11 digits)

Option 2

1+7-Digit Number (8 digits)

Option 3

Area Code+7-Digit Number (10 digits)

Option 4

7-Digit Number Only.

Follow the procedure below to select one of

the above options for Caller ID call back.

With the handset hung up on the base.

1 Press [REVIEW ] or [REVIEW ] to find the Caller

ID memory location to redialed. Press [CALL BACK],

the 7-digit number (if same area code) or 11-digit

number (if different area code) will blink.

2. Press [REVIEW ] or [REVIEW ] to select one of

the options.

3. Press [CALL BACK] again to confirm the dial.

ALARM OPERATION

Once the unit is powered on, the clock display will

shows '12:00'.

Setting the clock

1. Press the [CLOCK/ALARM SET] once. The colon

':' will not flash

2. Press the [TIME HR/MIN], the hour digits will flash.

3. Press the [TUNE RADIO/ADJ TIME ] or [TUNE

RADIO/ADJ TIME ] to select the correct hour time.

4. Press the [TIME HR/MIN] again, the minute digits

will flash.

5. Press the [TUNE RADIO/ADJ TIME ] or [TUNE

RADIO/ADJ TIME ] to select the correct minute

time.

6. Press the [TIME HR/MIN] again. The colon ':' will

not flash.

7. After about 8 seconds, the colon ':' flashes again to

resume the real time clock mode.

Setting the Alarm Time

1. Press the [CLOCK/ALARM SET] twice to set Alarm

1 time, the

icon will flash.

2. Press the [TIME HR/MIN], the hour digits will flash.

3. Press the [TUNE RADIO/ADJ TIME ] or [TUNE

RADIO/ADJ TIME ] to select the correct hour time.

4. Press the [TIME HR/MIN] again, the minute digits

will flash.

5. Press the [TUNE RADIO/ADJ TIME ] or [TUNE

RADIO/ADJ TIME ] to select the correct minute

time.

6. Press the [TIME HR/MIN] again. The colon ':' will

not flash.

7. To set Alarm 2 time, press the [CLOCK/ALARM

SET] once more, the

icon will flash.

8. Repeat steps 2 to 6 to select the correct hour and

minute time.

9. Press [CLOCK/ALARM SET] again and go back to

the real time clock mode.

Wake up to Buzzer or Music

Wake up to Buzzer

1. Set the alarm time as previously instructed.

2. Press the [ALARM] to switch to the proper alarm

mode as follows.

ALARM 1

ALARM 2

ALARM 1 + ALARM 2

ALARM OFF

3. Press the [WAKE TO BUZZER], the

on clock display will be lighted up and the Alarm

Buzzer will sound at the set alarm time.

Wake up to CD

1. Set the alarm time as previously instructed.

2. Press the [ALARM] to switch to the proper alarm

mode as follows.

ALARM 1

ALARM 2

ALARM 1 + ALARM 2

ALARM OFF

3. Press the [WAKE TO CD], the

icon on clock

display will be lighted up and the CD Disc will start

playing from the first track at the set alarm time.

NOTE: Suitable volume level should be set for wake

up to CD.

Wake up to Radio

1. Set the alarm time as previously instructed.

2. Press the [ALARM] to switch to the proper alarm

mode as follows.

ALARM 1

ALARM 2

ALARM 1 + ALARM 2

ALARM OFF

3. Press the [WAKE TO RADIO], the

clock display will be lighted up and the Radio will

start playing at the set alarm time.

NOTE: Suitable volume level should be set for wake

up to radio.

icon

icon on