DAN DRYER 3193 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Reinigungsgeräte DAN DRYER 3193 herunter. DAN DRYER 3193 9 Seiten.

Seite drucken

CLEANING AND MAINTENANCE

Routine cleaning and maintenance is recommended

REPLACEMENT OF DISINFECTANT BOTTLE

• Use the key supplied to open the door

• Remove empty bottle from the rack

• Replace with new bottle

• Insert pump tube into the bottle

• Close the door

CLEANING AND MAINTENANCE OF CONTROL BOX

• Cut the power

• Remove any dust and dirt

• Do not rinse with running water

• Use a damp cloth and mild cleaning solution. Never use cleaning detergents with

an abrasive effect

CLEANING AND MAINTENANCE OF TAP/SENSOR

• Do not rinse with running water

• Use a damp cloth and mild cleaning solution. Never use cleaning detergents with

an abrasive effect

• Clean sensor for dust and dirt to prevent unintentional activation

TROUBLESHOOTING AND CORRECTIVE ACTIONS

SYMPTOM

POTENTIAL CAUSE

No disinfectant is

Low supply

delivered

Sensor window is dirty

Obstruction in front of the

sensor window

Damaged sensor

Tube disconnected from pump If the end of the tube is damaged,

Sensor cabling disconnected

from control box

Power supply has been

disconnected

AC/DC adapter not connected

The dispenser

Sensor window is dirty

activates

Obstruction in front of the

unintentionally

sensor window

Damaged sensor

CORRECTIVE ACTION

Refill the disinfectant bottle

Clean the sensor window

Remove the obstruction

Contact DAN DRYER for advice

please remove the damaged part. The

undamaged tube is to be mounted on

the nozzle exit of the pump

Check that the cable from the faucet

is installed correctly in the control box

Check that the cable from the adapter

or the external battery box is installed

correctly in the control box (see page

Check that the AC/DC adapter is

plugged into the wall and is getting

power

Clean the sensor window

Remove the obstruction

Contact DAN DRYER for advice