AnyTone ARES II Gebrauchsanweisung - Seite 7

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Radio AnyTone ARES II herunter. AnyTone ARES II 16 Seiten.
Auch für AnyTone ARES II: Gebrauchsanweisung (16 seiten)

AnyTone ARES II Gebrauchsanweisung
Microphone connection
1. Plug microphone connector into jack.
2. Pull on the screw for microphone connector.
1
23
4
TX
1
3
5
7
9
ANTENNA INSTALLATION
Before using this radio, please install a high efficent and harmonious adjusted
CB antenna, suitable antenna type and correct installation will bring excellent
communication.
To match with the radio, the antenna and cable shall with characteristic impedance of
50ohm, or the antenna system will not efficient enough and will disturb TV, radio or other
electronics.
1. Screw the antenna connector into the antenna jack.
2. Grounding the antenna system to ensure best performance of this radio.
WARNING:
▲ Connect antenna firstly before transmiting, or it might damage the radio.
▲ To avoid the risk of fire, electric shock, radio damage, all base station shall
equip of lightning protector
▲ Be sure choose a matching antenna, you may enquiry our dealers.
3. The position of antenna can be put as following example:
POWER CONNECTION
This radio adopt 13.8V power supply, never connect it to 24V battery, And the 13.8V car
battery shall with sufficient current, or the LCD will become dark and Transmit power
will drop down.
1
23
4
TX
1
3
5
7
9
3