AnyTone ARES II 사용 설명서 - 페이지 7

{카테고리_이름} AnyTone ARES II에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AnyTone ARES II 16 페이지.
AnyTone ARES II에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

Microphone connection

1. Plug microphone connector into jack.

2. Pull on the screw for microphone connector.

ANTENNA INSTALLATION

Before using this radio, please install a high efficent and harmonious adjusted

CB antenna, suitable antenna type and correct installation will bring excellent

communication.

To match with the radio, the antenna and cable shall with characteristic impedance of

50ohm, or the antenna system will not efficient enough and will disturb TV, radio or other

electronics.

1. Screw the antenna connector into the antenna jack.

2. Grounding the antenna system to ensure best performance of this radio.

WARNING:

▲ Connect antenna firstly before transmiting, or it might damage the radio.

▲ To avoid the risk of fire, electric shock, radio damage, all base station shall

equip of lightning protector

▲ Be sure choose a matching antenna, you may enquiry our dealers.

3. The position of antenna can be put as following example:

POWER CONNECTION

This radio adopt 13.8V power supply, never connect it to 24V battery, And the 13.8V car

battery shall with sufficient current, or the LCD will become dark and Transmit power

will drop down.