DuctSox IHS Installationshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Installationshandbuch für Kabel und Anschlüsse DuctSox IHS herunter. DuctSox IHS 12 Seiten. Hoops cable

Hoops (IHS) Cable

Installation Manual

The following details are used for Galvanized Cable styles.

1. Eyebolts must be fastened to the structure of the building (including knee braces) by

others. They must be fastened in correct locations according to suspension style (Shown in

each suspension style's section).

2. Hook Gripple

Turnbuckles to the installed eyebolts.

3. Insert cable into the plastic end of the Gripple

the opening on the side of the Gripple

Note: To release the cable hold in the plastic button and slide the turnbuckle.

To lock the button twist the plastic until tight.

4. Tighten the cable to 100 lb (445 Newtons) tension by pulling the cable tight and then

twisting the turnbuckles. Clip extra cable when finished, leaving about 3 in (76 mm) of

cable extending through the side the Gripple Turnbuckle.

Turnbuckle and push/pull it through

Turnbuckle.

DuctSox

Publication: AMEN00415 2021-02-26