DuctSox IHS Instrukcja instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kable i złącza DuctSox IHS. DuctSox IHS 12 stron. Hoops cable

Drukuj stronę
Hoops (IHS) Cable
Installation Manual
The following details are used for Galvanized Cable styles.
1. Eyebolts must be fastened to the structure of the building (including knee braces) by
others. They must be fastened in correct locations according to suspension style (Shown in
each suspension style's section).
2. Hook Gripple
Turnbuckles to the installed eyebolts.
®
3. Insert cable into the plastic end of the Gripple
the opening on the side of the Gripple
Note: To release the cable hold in the plastic button and slide the turnbuckle.
To lock the button twist the plastic until tight.
4. Tighten the cable to 100 lb (445 Newtons) tension by pulling the cable tight and then
twisting the turnbuckles. Clip extra cable when finished, leaving about 3 in (76 mm) of
cable extending through the side the Gripple Turnbuckle.
4
Turnbuckle and push/pull it through
®
Turnbuckle.
®
DuctSox
Publication: AMEN00415 2021-02-26
®