DuctSox IHS Instrukcja instalacji

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kable i złącza DuctSox IHS. DuctSox IHS 12 stron. Hoops cable

Hoops (IHS) Cable

Installation Manual

Thank you for selecting a DuctSox System. This manual will be helpful for the installation of a Hoops (IHS) Cable System.

Sections of fabric will be labeled, assembled, bagged, and boxed for shipping. More complicated systems will include a

CAD detail of the system identifying what is in each package. NOTE: The DuctSox cable attachment (Glider) is built for

1/8 in (3 mm) cable only.

Overview

Inventory

The first step on any installation project is to read through this Manual thoroughly and review the components that need

to be installed. The best way to do this is to review the drawings of the project while reading the Manual, including the

CAD detail if applicable.

Shipping/Receiving

In some cases the DuctSox support system is delivered to the job site ahead of the DuctSox fabric sections. Depending

on the size of a project or order, a DuctSox system will be shipped by common courier in a single brown box or several

boxes. Larger orders will be shipped in crates by a common freight courier. Each DuctSox length should be packaged

into individual plastic bags and labeled according to size and number of pieces. Other markings or labeling may also be

incorporated for larger or more complicated systems. Be sure you have determined all boxes are accounted for.

Unpacking

Inspect shipment carefully and make sure all pieces are accounted for. Account for everything by emptying the box and

examining all contents. Note any missing or damaged pieces listed on the Bill of Lading.

Labeling

Each DuctSox section will be marked with the size and section number either inside the belt of the inlet or on a tag

inside the DuctSox near the zipper. The marking shall be the diameter, section length and total length. If custom labeling

has been used, locate an identification sheet that will be included with the delivery.

Equipment Required:

• Drill

• Level

• Tape measure

• Marker or pencil

• Wrenches for cable clamps and eye bolts (5/16 in and 9/16 in)

• Flat (standard) screwdriver

• Cable cutter

Language: English

Publication: AMEN00415 2021-02-26