AnyTone AT600 Installationshandbuch - Seite 12
Blättern Sie online oder laden Sie pdf Installationshandbuch für Wiederholer AnyTone AT600 herunter. AnyTone AT600 18 Seiten. Mobile signal repeater
Auch für AnyTone AT600: Installationshandbuch (19 seiten)
Seite drucken
6. Plug the power supply into the Signal Booster input (carefully, to avoid damaging the center pin) and then into a wall
outlet.
Note: It is recommended to plug all AC power supplies for home electronics into a Surge Protector Power Strip.
7. If the light indicator doesn't turn on, please see the lights indication instructions.
8. Using multiple Signal Boosters in one installation could cause interference to the base station (except for the In-Line
Signal Boosters).
7.2.2. Repeater's ports description
1. Outdoor port: connected with the outdoor antenna by cable
2. Indoor port: connected with indoor antenna directly or by cable
3. DC IN: connected with power supply.
7.2.3. Accessories selection
Choosing accessories pay attention to the two characteristics – frequency and impedance. All accessories shall support the
repeater's frequencies. For example, if the repeater's frequency is GSM900, all the accessories must support the GSM900
frequency.
7.3. Repeater Settings
7.3.1. Indicator Light Instructions
7.4. System Test