AnyTone AT600 설치 매뉴얼 - 페이지 12

{카테고리_이름} AnyTone AT600에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AnyTone AT600 18 페이지. Mobile signal repeater
AnyTone AT600에 대해서도 마찬가지입니다: 설치 매뉴얼 (19 페이지)

페이지 인쇄

6. Plug the power supply into the Signal Booster input (carefully, to avoid damaging the center pin) and then into a wall

outlet.

Note: It is recommended to plug all AC power supplies for home electronics into a Surge Protector Power Strip.

7. If the light indicator doesn't turn on, please see the lights indication instructions.

8. Using multiple Signal Boosters in one installation could cause interference to the base station (except for the In-Line

Signal Boosters).

7.2.2. Repeater's ports description

1. Outdoor port: connected with the outdoor antenna by cable

2. Indoor port: connected with indoor antenna directly or by cable

3. DC IN: connected with power supply.

7.2.3. Accessories selection

Choosing accessories pay attention to the two characteristics – frequency and impedance. All accessories shall support the

repeater's frequencies. For example, if the repeater's frequency is GSM900, all the accessories must support the GSM900

frequency.

7.3. Repeater Settings

7.3.1. Indicator Light Instructions

7.4. System Test