DUDOFF C04-M1 Installations- und Gebrauchsanweisung - Seite 8

Blättern Sie online oder laden Sie pdf Installations- und Gebrauchsanweisung für Kochfeld DUDOFF C04-M1 herunter. DUDOFF C04-M1 12 Seiten. Built-in ceramic hob

Seite drucken

INSTRUCTION FOR THE USER

Configuration examples.

The following examples detail the basic functioning

of the timer combining the timed heating element

(programmable).

Programmable timed heating element + timer

setting

The timer always functions in timer mode,

regulating the time during which the timed heating

element programmed by the user is activated.

The activation of this setting is indicated by the

presence of a decimal point on the timer display

(7). To select the timed heating element, when the

timer is activated a Led switch on the displays (5)

of each one of the heating elements. The user has

10 seconds to select the heating element he or she

wishes to time. To select a heating element, simply

press either the (+) or (-) (Key 1) sensors of the

chosen heating element.

Once the heating element has been selected, the

Led on the displays (5) will disappear, enabling the

user to select the power settings and timer values

required. Once the programmed time is over, the

timed heating element will automatically switch

itself off.

The corresponding display (5) also switches off

or shows an "H" to indicate residual heat and the

timer alarm is activated.

If the user does not select a heating element, the

process is cancelled, the Led disappears from the

displays (5) and the timer is deactivated.

The selection process is reinitiated each time the

timer is activated.

Programmable timed heating element + timer-

alarm setting

The timer can function in either timer mode or in

alarm mode. When the timer is activated, a Led

appears on the displays (5) of each of the heating

elements. The user has 10 seconds to select the

heating element he or she wishes to time. To select

a heating element, simply press either the (+) or (-)

(1) sensors of the chosen heating element.

Timer mode: once the heating element has been

selected, the Led on the displays (5) will disappear,

enabling the user to select the power settings and

timer values required. The activation of this setting

is indicated by the presence of the decimal point on

the timer display (7). Once the programmed time

has passed, the timed heating element will switch

itself off automatically. The corresponding display

(5) also switches off or shows an "H" to indicate

residual heat and the timer alarm is activated.

General switch-off

The cook top can always be switched off,

regardless of the mode of operation it is, by

touching the On/Off sensor (Key 6) for 1 second.

On switching off, there is a beep signal and the

displays are turned off, unless there has to be an

"H" for residual heat on any display.

Special Notes

If the keys for (+) and (-) (Key 1) of an element are

touched together, the element turns off (display at

0). If the keys touched simultaneously are not of

the same element the keyboard is locked and no

operation is allowed.

The On/Off function prevails if 2 keys are touched

at the same time, but only to turn off.

If all the cooking levels are at position 0, the control

will turn off automatically after 10 sec. If a sensor

is pressed for more than 10 sec., the control will

automatically turn off and a "beep" will sound every

30 sec., while the sensor is pressed.

CLEANING

Remove leftovers and grease from the cooking

surface with the special scraper (fig.2) (optional).

After that clean the heating area as best as

possible whit a paper towel and SIDOL, STAHLFIX

o other similar products. Never use abrasive

sponges or irritating chemical detergents such as

over spray or spot removers.