DUDOFF C04-M1 Instrukcja instalacji i obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Hob DUDOFF C04-M1. DUDOFF C04-M1 12 stron. Built-in ceramic hob
Drukuj stronęINSTRUCTION FOR THE USER
Configuration examples.
The following examples detail the basic functioning
of the timer combining the timed heating element
(programmable).
Programmable timed heating element + timer
setting
The timer always functions in timer mode,
regulating the time during which the timed heating
element programmed by the user is activated.
The activation of this setting is indicated by the
presence of a decimal point on the timer display
(7). To select the timed heating element, when the
timer is activated a Led switch on the displays (5)
of each one of the heating elements. The user has
10 seconds to select the heating element he or she
wishes to time. To select a heating element, simply
press either the (+) or (-) (Key 1) sensors of the
chosen heating element.
Once the heating element has been selected, the
Led on the displays (5) will disappear, enabling the
user to select the power settings and timer values
required. Once the programmed time is over, the
timed heating element will automatically switch
itself off.
The corresponding display (5) also switches off
or shows an "H" to indicate residual heat and the
timer alarm is activated.
If the user does not select a heating element, the
process is cancelled, the Led disappears from the
displays (5) and the timer is deactivated.
The selection process is reinitiated each time the
timer is activated.
Programmable timed heating element + timer-
alarm setting
The timer can function in either timer mode or in
alarm mode. When the timer is activated, a Led
appears on the displays (5) of each of the heating
elements. The user has 10 seconds to select the
heating element he or she wishes to time. To select
a heating element, simply press either the (+) or (-)
(1) sensors of the chosen heating element.
Timer mode: once the heating element has been
selected, the Led on the displays (5) will disappear,
enabling the user to select the power settings and
timer values required. The activation of this setting
is indicated by the presence of the decimal point on
the timer display (7). Once the programmed time
has passed, the timed heating element will switch
itself off automatically. The corresponding display
(5) also switches off or shows an "H" to indicate
residual heat and the timer alarm is activated.
General switch-off
The cook top can always be switched off,
regardless of the mode of operation it is, by
touching the On/Off sensor (Key 6) for 1 second.
On switching off, there is a beep signal and the
displays are turned off, unless there has to be an
"H" for residual heat on any display.
Special Notes
If the keys for (+) and (-) (Key 1) of an element are
touched together, the element turns off (display at
0). If the keys touched simultaneously are not of
the same element the keyboard is locked and no
operation is allowed.
The On/Off function prevails if 2 keys are touched
at the same time, but only to turn off.
If all the cooking levels are at position 0, the control
will turn off automatically after 10 sec. If a sensor
is pressed for more than 10 sec., the control will
automatically turn off and a "beep" will sound every
30 sec., while the sensor is pressed.
CLEANING
Remove leftovers and grease from the cooking
surface with the special scraper (fig.2) (optional).
After that clean the heating area as best as
possible whit a paper towel and SIDOL, STAHLFIX
o other similar products. Never use abrasive
sponges or irritating chemical detergents such as
over spray or spot removers.
8