DUDOFF C04-M1 Instrukcja instalacji i obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Hob DUDOFF C04-M1. DUDOFF C04-M1 12 stron. Built-in ceramic hob
Drukuj stronęINSTRUCTION FOR THE USER
Increase of timer value
Pressing the (+) or (-) (Key 8) timer sensors for
a sustained period will result in an automatic
increase/decrease, enabling the user to reach the
desired timer value faster.
1 minute increases:
After the tenth consecutive increase/decrease the
timer value increases or decreases faste.
Timed heating element
Any of the heating elements under the touch
control system, either simple or double, can be
timed. When the timed period is over, the timed
heating-element (and if applicable the twin area as
well) switches itself off automatically.
●Programmable heating element:
The user can decide which heating element to
time. The selection of a new heating element
cancels the previous choice, this the timer setting
can only apply to one heating element at a time.
When we touch the keys (8) of the timer the first
time, it will appear a led in each heating element
display waiting you selection.
• We always have to select the heating element
after we have pressed a key of the timer.
• If we do not select any heating element during 10
sec., then the timer will switch off.
• After our heating-element selection we do not
indicate a time different than 00, in 10 sec. The
timer will switch off.
It could be possible to temporized a heating
elementwith power level 0.
Indication of timed heating element.
The touch control indicates the heater on which the
timer is operating. This indication consist of a Led
next to the double display of the heater on timer.
This option reminds the user at all times that the
heater is on timer.
Duration of the acoustic alarm
Once the timed period has finished, an acoustic
alarm sounds for a certain period and <00> flashes
on the timer displays (7).
The acoustic alarm stops after one minute. The
timer displays continue to flash <00>.The user can
switch off the alarm at any moment, even during
the first minute, by pressing any sensor of the
touch control.
Default initial timer value
The timer is switched on by pressing the (+) or (-)
timer sensors (Key 8). If the (-) sensor is pressed
the initial timer value will be 99 minutes, where as
with the (+) sensor, the initial timer value can be
pre-determined to any value between 00 and 99
minutes.
Timer-Alarm mode
• Timer mode: when the programmed period is
over, the alarm is activated and the timed heating
element switches itself off automatically. If the
timer is set in this mode, this is indicated by the
fact that the decimal point on the timer display is
lit (7).
7