DUDOFF C04-M1 Instrukcja instalacji i obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Hob DUDOFF C04-M1. DUDOFF C04-M1 12 stron. Built-in ceramic hob

Drukuj stronę

INSTRUCTION FOR THE USER

All operation relative to installation and electric connection should be carried out by

skilledpersonnel in conformity with the regulations in force. The specific instruction are described

NOTICE

• Use only flat pans and with sufficiently thick base,

equal or not much superior that the hot plate

(fig.1).

• The containers should not have rough bottoms in

order to avoid scratching the heat surface of the

top.

• Do not switch the electric plate without the pan

over the plate.

• Do not cook any food on the hot area.

• Avoid overflows of liquid.

• Turn off the plate few minutes before the cooking

end.

USE

Switching on

The control is switched on by pressing the On/Off

key (key 6) for 1 second, causing a sound signal;

it will not turn on while the Key Lock function (key

10) is active (indicated by a LED) (Led 11).

The heating elements remain switched off (all the

digits at 0) until a power level is selected. If this is

not done with in 10 seconds the control switches

off automatically.

Selecting the cooking level

With the control turned on, the first time that the (+)

sensor (key 1) is touched the heating element is

turned on to the present level (in EEPROM).

The (+) sensor raises the cooking level to a

maximum of 9, and the (-) (key 1) sensor reduces

the cooking level to 0 (heating element switched

off).

If a sensor is continuously pressed, the action

involved is repeated every half second.

If we start with the (-) sensor the cooking level will

be the highest (9).

Switching the double cooking area

The control (key3) or (key12) can be used to

activate 2 heating elements with a double cooking

area. Each cooking areahas an associated LED

in the booklet section intended for the installer

(Led 4 & 13).

Touch the double area selector to select/deselect

the double cooking area. If one heating-element

has 1 double area the procedure will be:

• 1rs-touch: the double area is selected.

• 2nd-touch: double area are not selected.

When the double cooking area is selected the

associated LED (Led 4 or 13) turns on, although its

heating-element has not any power level, and its

relay will be still switch.

Activating the heat-up function

When cooking level 9 is selected (this function can

only be operated from this level) touching the (+)

(Key1) sensor, the decimal point on the display

(5) blinks for 10 seconds, during which the desired

power level must be selected (between 1 and 8).

After this time there is a sound signal, and the

decimal point remains fixed, indicating the heat-up

function is ON. Should the selected level be 0 or 9,

the heat-up function is cancelled.

With the heat-up function activated, by touching

the (+) sensor the duration of this function extends

to the new power value selected; if the power is

9, the heat-up function is cancelled. When the

heat-up functionis finished, there is a sound signal,

the decimal point of the display goes out and the

element remains at the chosen power level.

POWER LEVEL

HEAT-UP TIMER

1'11"

2'44"

4'47"

5'28"

6'29"

1'11"

2'44"