DUDOFF C04-M1 Посібник з монтажу та інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з монтажу та інструкція з експлуатації для Варильна поверхня DUDOFF C04-M1. DUDOFF C04-M1 12 сторінок. Built-in ceramic hob

Друкувати сторінку

INSTRUCTION FOR THE USER

Increase of timer value

Pressing the (+) or (-) (Key 8) timer sensors for

a sustained period will result in an automatic

increase/decrease, enabling the user to reach the

desired timer value faster.

1 minute increases:

After the tenth consecutive increase/decrease the

timer value increases or decreases faste.

Timed heating element

Any of the heating elements under the touch

control system, either simple or double, can be

timed. When the timed period is over, the timed

heating-element (and if applicable the twin area as

well) switches itself off automatically.

●Programmable heating element:

The user can decide which heating element to

time. The selection of a new heating element

cancels the previous choice, this the timer setting

can only apply to one heating element at a time.

When we touch the keys (8) of the timer the first

time, it will appear a led in each heating element

display waiting you selection.

• We always have to select the heating element

after we have pressed a key of the timer.

• If we do not select any heating element during 10

sec., then the timer will switch off.

• After our heating-element selection we do not

indicate a time different than 00, in 10 sec. The

timer will switch off.

It could be possible to temporized a heating

elementwith power level 0.

Indication of timed heating element.

The touch control indicates the heater on which the

timer is operating. This indication consist of a Led

next to the double display of the heater on timer.

This option reminds the user at all times that the

heater is on timer.

Duration of the acoustic alarm

Once the timed period has finished, an acoustic

alarm sounds for a certain period and <00> flashes

on the timer displays (7).

The acoustic alarm stops after one minute. The

timer displays continue to flash <00>.The user can

switch off the alarm at any moment, even during

the first minute, by pressing any sensor of the

touch control.

Default initial timer value

The timer is switched on by pressing the (+) or (-)

timer sensors (Key 8). If the (-) sensor is pressed

the initial timer value will be 99 minutes, where as

with the (+) sensor, the initial timer value can be

pre-determined to any value between 00 and 99

minutes.

Timer-Alarm mode

• Timer mode: when the programmed period is

over, the alarm is activated and the timed heating

element switches itself off automatically. If the

timer is set in this mode, this is indicated by the

fact that the decimal point on the timer display is

lit (7).